Home | Planning Center | Planning Your Project | Measurements of each window

Planning Your Project
Measurements of each window

Measuring your windows is quite possibly to single most important element in purchasing your window treatments. It is also the factor where errors are most often made. Here are some key elements to help you get the correct measurements of your windows.

1. You should have decided the kind of treatment that you want to apply to the window.
2. Always use a steel tape measure and your measurements to the nearest eigth inch.
3. Is it going to be mounted inside or outside?
4. If is going to be outside measure the width in three places (Top, Middle and Bottom) and use the largest measurement.
5. If it is to be an inside mount, first measure the depth (To the nearest obstacle – cranks, window locks, security devices and so on). Then make sure that the product that you want for this window is capable of fitting in that area without hitting these obstacles.
6. Again, measure in three places (Top Middle and Bottom) except this time, use the smallest measurement.
7. If the treatment is being applied to a slider, pay attention to which way the door opens and if door handles, heat runs or cabinets may cause potential issues in operation.
8. Strategically place the controls of your treatments in order to avoid furniture, allowing for easy access.
9. Never assume that all the windows in a room are the same size. You’ll most likely regret it.